The results of a thorough analysis of the ingress paths of cutting oil show that the deterioration of cable sheaths is a large factor.
The cable sheaths of OMRON’s Oil-resistant Components are made from fluororesin materials to provide maximum protection against the deterioration with a unique new concept. The result is an oil resistance impregnable to even highly aggressive cutting oils.
No Cutting Oil Ingress by Any Path The Strongest Material Cables with Fluororesin Sheaths
Fluororesin Blocks Ingress from Cables
[Patent Pending] Fluororesin Outer Cable Sheath
Fluororesin, which provides superior resistance to corrosion, is used for the outer cable sheath to suppress cable swelling and deterioration and prevent the ingress of cutting oil into the PCB inside the Sensor.
*The Strongest Material: Based on June 2016 OMRON investigation.
No Cutting Oil Ingress by Any Path Advanced Sealing Method
In addition to cable sheaths, joints, and moving sections, cutting oil enters most easily in gaps between different materials. OMRON’ s Oil-resistant Components completely block the ingress of cutting oil with a state-of-the-art sealing method that does not allow the creation of gaps.
Ingress through Cable Joints Is Blocked with a State-of-the-art Sealing Method
[Patent Pending] Heat-Sealing Method
A fluororesin cable is heat-welded with a fluoro component which has a high bondability and a melting point close to that of the cable. This blocks the ingress of cutting oil from the joined surfaces.
Tags: E2ER / E2ERZ